全国服务热线笔记该网站上的所有产品都是特殊产品，市场价格一直在波动，
具体以客户服务报价为准，因为产品是新产品，陷阱不是真的，
请在下单前与客服确认型号和产品、价格等详细信息,网站已使用，
新的正在出售，请联系客服沟通。
产品描述
MSM030C -0300-NN-C0-CG1 电机是博世力士乐 EcoDrive Cs 伺服 驱动器的组件之一。其他组件包括兼容的驱动控制器、主通信卡、电缆、连接附件和电源变压器。MSM030C-0300-NN-C0-CG1 电机与DKCxx.x-012 驱动 控制器兼容。EcoDrive Cs 驱动器有四种电机尺寸可供选择，其尺寸适合驱动控制器。EcoDrive C 的应用包括机床、印刷机和搬运系统。MSM030C -0300-NN-C0-CG1 电机尺寸为 030，长度为 C，绕组代码为 0300。电机的可用功能包括电缆尾部电气连接、光轴、额定值为 1.27 Nm 的电气释放型抱闸以及具有 1024 个增量的增量编码器。电气连接的长度为200毫米。MSM030C-0300-NN-C0-CG1上的电机轴直径为 14 毫米，电机长度为 156.5 毫米，高度/宽度为 60 毫米。MSM030C-0300-NN-C0-CG1 https://www.weikunfadacai1.com/
支持的冷却类型是自然对流(无鼓风机)。电机的电气参数包括静止时 1.2 Nm 连续扭矩、静止时 2.3 安培连续电流、7.4 安培峰值电流和 4 极对。电机的额定数据包括 3000 RPM 额定速度、1.2 Nm 额定扭矩、2.3 安培额定电流、377 瓦额定功率和 132 伏额定电压。MSM030C-0300-NN-C0-CG1的机械参数包括25秒热时间常数、1.5公斤重量、1000米最大安装高度和IP65防护等级。电机具有符合 DIN VDE0530 第 1 部分的 B 级绝缘等级。建议的环境温度范围为 32 至 104 华氏度。
MSM030C -0300-NN-M0-CG1是博世力士乐集团MSM系列同步电机中的一款伺服电机。该电机具有抱闸以及用于电源和编码器连接的连接器。由于内部装有多圈绝对值编码器，因此具有较高的精度。该装置还具有紧凑的设计和良好的动态响应。它支持自然对流自冷却，无需使用鼓风机。该设备可以通过我们的送货代理发送到您选择的地址。
当电机在指定的径向和轴向负载限制内运行时，电机轴承的典型使用寿命为20,000 个运行小时。当设备配备变速箱时，扭矩会减少 10% 至 20%。它的额定功率为 400W。该装置有一个带有电缆尾部式电气连接的光轴。抱闸采用外部电源并支持 1.27Nm 电动释放。电机尺寸为300，绕组类型为0300，长度为C。设备支持IEC721规范的1K3气候类别。最高速度为5,000min -1，质量为1.5kg。
当齿轮箱安装在电机上时，伺服装置通过法兰的散热会减少。工作时，输出轴装有法兰的一侧相对于电机外壳可能会移动0.6mm。该装置的热时间常数为25s，最大扭矩为3.8Nm。它还具有 32.6 +/-0%V/1,000min -1的电压常数和 20°C 时 0.54 +/-10% 的扭矩常数。电机保修期为一年。
Product Description
The MSM030C-0300-NN-C0-CG1 motor is one of the components of the Bosch Rexroth EcoDrive Cs servo drive. Other components include compatible drive controllers, main communication cards, cables, connection accessories, and power transformers. The MSM030C-0300-NN-C0-CG1 motor is compatible with the DKCxx.x-012 drive controller. The EcoDrive Cs driver comes in four motor sizes to choose from, which are suitable for driving controllers. EcoDrive C's applications include machine tools, printing machines, and handling systems. The size of the MSM030C-0300-NN-C0-CG1 motor is 030, the length is C, and the winding code is 0300. The available functions of the motor include electrical connection at the end of the cable, optical axis, electrical release type brake with a rated value of 1.27 Nm, and incremental encoder with 1024 increments. The length of the electrical connection is 200 millimeters. The motor shaft diameter on MSM030C-0300-NN-C0-CG1 is 14 millimeters, the motor length is 156.5 millimeters, and the height/width is 60 millimeters. MSM030C-0300-NN-C0-CG1
The supported cooling type is natural convection (without blower). The electrical parameters of the motor include a continuous torque of 1.2 Nm at rest, a continuous current of 2.3 amperes at rest, a peak current of 7.4 amperes, and a 4-pole pair. The rated data of the motor includes a rated speed of 3000 RPM, a rated torque of 1.2 Nm, a rated current of 2.3 amperes, a rated power of 377 watts, and a rated voltage of 132 volts. The mechanical parameters of MSM030C-0300-NN-C0-CG1 include a 25 second thermal time constant, a weight of 1.5 kilograms, a maximum installation height of 1000 meters, and an IP65 protection level. The motor has a B-class insulation level in accordance with DIN VDE0530 Part 1. The recommended ambient temperature range is 32 to 104 degrees Fahrenheit.
MSM030C-0300-NN-M0-CG1 is a servo motor in the MSM series synchronous motors of Bosch Rexroth Group. This motor has a brake and a connector for connecting the power supply and encoder. Due to the internal installation of a multi turn absolute value encoder, it has high accuracy. The device also has a compact design and good dynamic response. It supports natural convection self cooling without the need for a blower. This device can be sent to the address you choose through our delivery agent.
When the motor operates within the specified radial and axial load limits, the typical service life of the motor bearings is 20000 operating hours. When the device is equipped with a gearbox, the torque will be reduced by 10% to 20%. Its rated power is 400W. The device has an optical axis with a cable tail electrical connection. The brake adopts an external power supply and supports 1.27Nm electric release. The motor size is 300, the winding type is 0300, and the length is C. The device supports the 1K3 climate category according to the IEC721 specification. The maximum speed is 5000min-1 and the mass is 1.5kg.
When the gearbox is installed on the motor, the heat dissipation of the servo device through the flange will be reduced. During operation, the side of the output shaft with flange may move 0.6mm relative to the motor casing. The thermal time constant of the device is 25 seconds, and the maximum torque is 3.8 Nm. It also has a voltage constant of 32.6+/-0% V/1000min-1 and a torque constant of 0.54+/-10% at 20 ° C. The warranty period for the motor is one year.
仓库货品推荐：
